Snake Plant Splitting – Reasons For Splitting Of Snake Plant

Snake Plant Splitting – Reasons For Splitting Of Snake Plant

Snake plants, also known as the Sansevieria plants, grow at warm temperatures and require indirect light for long hours. Snake plant leaves are the attraction of the plant. They bloom during spring seasons at suitable conditions.

As per feng shui, the snake plant is a bad omen plant. Hence, you should place the snake plant pots in any corner and not in the front. For this reason, the snake plant is also known as the mother-in-law’s tongue plant. Well, a mother-in-law’s tongue is not always bad! These snake plants make the best at-home buddies and companions as they produce oxygen and purify the air, especially at night.

Snake Plant Splitting

Do you have snake plants at home? Following feng shui or decorative ideas might lead to splitting the snake plants. Read this blog post till the end to learn about the reasons for snake plants splitting and the process of curing it. Happy reading!

How to propagate snake plant with a broken snake plant leaf?

How to propagate snake plant

Using water is the easiest and most reliable solution for snake plant propagation. Well, can we do that using a broken leaf? For propagating using a broken snake plant leaf, make sure that you are cutting the edge with a sharp knife and using it for propagating by following the steps mentioned below.

  1. The container that you choose to propagate the leaf should be tall enough to hold the leaf vertically straight.
  2. Now gently pull apart by grabbing a healthy leaf from the plant’s base and then cut it with a sharp knife.
  3. Place the cut leaf in the container and fill it with water until the lower end of the leaf is immersed.
  4. Now place the container with the snake plant leaf cutting in a place where it gets a great amount of indirect sunlight.
  5. Let the roots form at the bottom and we recommend changing the water in the container every two to three days.
  6. Once the roots are formed, plant the leaf in a pot with a good soil mix. Make sure that the pot has enough holes to drain excess water so that the plant is not rotten due to over watering.

Well, now that we know how to propagate a snake plant using a leaf, the next important thing is to know about the reasons for splitting of snake plant. Read further to know more about them!

Why do Snake plants split? – Reasons For Splitting Of Snake Plant

If snake plants do not get proper care or are exposed to unsuitable conditions. Plants start looking differently; some leaves also start drooping, and sometimes they start splitting. There are many reasons why the leaves of the snake plant start splitting. Some of them are as follows.

  • When you expose the snake plant pot to extreme sunlight, the leaves start splitting since the sun absorbs the water content from the leaves.
  • In winter or frost situations, the moisture from the snake plant leaves gets absorbed. This happens because the humidity level from the surrounding becomes low. Firstly the growth of the plant slows down, and then, it dies.
  • Underwatering is also a significant cause of the splitting snake plant. Soil starts absorbing water when it gets scorched by the plants. In this process, the snake plant leaves become short of moisture and start splitting.
  • Too much sunlight also burns the plant, which leads to the splitting of the leaves.

Know Your Snake Plant Better

The snake plant, also known as mother-in-law’s tongue, has upright leaves. This plant looks attractive due to its leaves. The snake plants’ leaves have dark green and light green patches. The stem of the snake plant is rarely visible. Snake plants bloom when they receive enough sunlight to bloom.

Know Your Snake Plant Better

Snake plants purify the air by absorbing all the toxins from the air. According to Vastu, you should place snake plants in front because they are signs of a bad omen. Snake plants grow easily. They are tolerant of fluctuating and cool temperatures. Extreme temperatures harm their growth. They do not require too much water and grow well in full sunlight.

Read further to learn more about snake plants and methods to grow snake plants.

Methods To Grow Snake Plant To Avoid Splitting and Snake Plant Pests

Snake plants grow in full sunlight. The main attraction of snake plants is their leaves, which require enough sunlight and water to grow upright and moisturized. A few ways to grow snake plants are as follows.

  • Take a container that is a bit larger than the roots. Ensure the container is not so large because the roots will start developing, and the shoot part will stop growing.
  • Make sure that you make a hole in the container. This will help to increase the drainage of the soil and will give proper aeration to the plants.
  • Mix compost and manure into the soil. This will help the soil to become fertile. Also, add dilute fertilizers to the plant. This will help to remove the snake plant pests and insects.
  • Place the snake plant and keep it where it will receive indirect or partial sunlight.
  • Water the plant until the soil gets moist. For the next watering, wait until the soil gets dry.

Tips To Care For Snake Plant

Snake plants require a lot of attention. These plants grow differently as compared to other plants.

Tips To Care For Snake Plant

  • Snake plants need indirect sunlight. If you keep the plant in full sunlight, then cover the plant with transparent paper. This will allow the plant to absorb less heat from the sun.
  • Cover the plant with a blanket; this will help the plant to remain warm. It will allow the plant to retain moisture and keep its leaves fresh and upright.
  • Water the plant when you find the soil gets dry. This will help you to avoid overwatering problems. Water once or twice a week but ensure that when you find the leaves yellow or dry soil, then pour water immediately.
  • You can keep the plant in fluorescent light if it needs more light.
  • Do not keep the snake plant in airy conditioners, heaters or artificial environments. This absorbs all the moisture from the plant and does not allow leaves to dis-shape and grow slowly.

Why do the leaves of the snake plant start splitting? This question still needs to be resolved. Read further to get answers on this topic.

Ways To Cure Snake Plant For Splitting

Snake plants get affected when they do not get proper conditions. To cure the plant, you must first be aware of why the snake plant is suffering and what is happening to the plant. Below are a few ways to cure the splitting of the leaves of the snake plant.

Ways To Cure Snake Plant For Splitting

  • Cover the plant with a transparent plastic that will enable the plant to receive sunlight and resist heat.
  • Ensure that the plant receives only a little water or less water. Water the plant properly when the soil starts getting dry. Water the soil so that it becomes moist.
  • In winter, cover the plant with a blanket; this will give warmth to the plant. And it will be able to survive cold climates.
  • Make sure that the plant receives enough sunlight. Keep the plant near a fluorescent bulb if it does not receive too much sunlight. This will help the plant to grow properly.
  • Change the plant’s soil, or add water to it to dilute it. Also, make sure you add a bit of compost, perlite, and sand for the soil to become well-drained. This will help the plant to neutralize the effect of fertilizers.

Let’s learn more facts about snake plants and their requirements. Enjoy reading!

FAQs On Snake Plants Splitting

1. How much and when should you water the snake plant?

Pour water into the plant by testing the water level of the soil. Touch the soil; if the soil does not stick to your fingertips, pour water into the plant. Water the plant until the soil gets moist. Do not make the soil too soggy; it harms the plant.

2. For how long should you keep snake plants in the sunlight?

Ensure that the plant receives nearly five to six hours of sunlight.

3. Is there any way to protect snake plants from frost?

Cover the plant with a blanket, but do not keep the plant near any man-made temperature conditions.

Key Takeaways

Snake plants grow in warm temperatures. They require indirect sunlight, while airy conditions are not good for them. You should water snake plants once a week during summer and once a month during winter. Make sure that you add a dilute form of fertilizer and less amount.

During winter, do not add any compost or fertilizers. This will harm the plant because they absorb fewer nutrients from the soil. Snake plants strive to survive and face problems like splitting leaves, root rot problems, and others in non-suitable conditions.

Hope you enjoyed reading this article and got complete information about what you were searching for! Share and subscribe to the post to gain more knowledge.

Leave a Comment